(fast, safe)

If you are in Nigeria and you have been asking “Why won’t my MTN data work?” this guide is for you. I am going show you How to get MTN settings automatically, official MTN APN settings, step-by-step setup for Android, iPhone, routers, USB modems and MiFi. So, if your having issues browsing the internet make sure you follow the steps in this guild.

Also check

Code for night plan on mtn

Code for check NIM with MTN number

Code for check BVN with MTN number

How to Check MTN Balance

This are the MTN Internet / APN Settings you will get automatically if you follow this guild

Primary APN (recommended ):

Name / Account name: MTN WEB
APN (Access Point Name): web.gprs.mtnnigeria.net
Username: (leave blank)
Password: (leave blank)
Proxy: (leave blank)
Port: (leave blank)
MMSC / MMS proxy / MMS port: (not required for normal internet)
APN type: default,supl (if field exists)
APN protocol: IPv4 / IPv4v6 (leave default)
Bearer: Unspecified
Authentication type: None

How to get MTN settings automatically (fast, safe)

1. Insert your MTN SIM into the device.
2. Open SMS app, compose message: SETTINGS and send to 3888.
3. You will receive a configuration SMS. Save / install when prompted.
4. Restart device (recommended).

This is MTN’s recommended automatic method. If your device accepts operator configuration messages, this is the easiest way

Mtn Manual APN Settings for Android

To setup mtn apn manually for android follow this step:

1. Go to Settings → Network & Internet (or Connections) → SIMs & mobile networks → [select SIM] → Access Point Names (APN).
2. Tap + (Add) or the three-dot menu → New APN.
3. Enter fields (use the official APN above). Example:

Name: MTN WEB
APN: web.gprs.mtnnigeria.net
Username: (blank)
Password: (blank)
MCC: 621 (should auto-fill for Nigeria)
MNC: 30 (should auto-fill)
Authentication Type: None
APN type: default,supl

4. Save the APN, tap it to activate.
5. Toggle Mobile Data off/on; restart phone if needed.

Vendor tips:

• Samsung: Settings → Connections → Mobile networks → Access Point Names.
• Tecno/Infinix/Itel: sometimes under Dual SIM settings → Mobile network → Access point names.
• If you have multiple APNs, pick the one marked as default or the one you just created.

(If your phone asks to accept configuration from MTN after sending SETTINGS to 3888, accept it.)

Mtn Manual APN Settings for iPhone / iPad (iOS)

This are the mtn manual apn setting for for iPhone / iPad (iOS)
Go to Settings → Cellular → Cellular Data Network → enter:

Cellular Data
APN: web.gprs.mtnnigeria.net
Username: (blank)
Password: (blank)

LTE setup (Personal Hotspot)
APN: web.gprs.mtnnigeria.net
Username: (blank)
Password: (blank)

Install via configuration profile (when fields are hidden): request MTN SMS configuration or use Apple Configurator / a .mobileconfig file (example below).

Note: iOS may hide some APN fields if the carrier locks them. You can install a profile or enter settings manually if fields are visible.

Working config code for modems & power users

If you’re configuring a 3G/4G USB modem, router or IoT module that accepts AT commands:

AT+CGDCONT=1,"IP","web.gprs.mtnnigeria.net"

Explanation:

• +CGDCONT sets PDP context. 1 is the context ID, "IP" indicates IPv4 data. Replace "IPV4V6" if your device supports dual stack and MTN supports it.

After setting, save to NVRAM if your module supports it (factory-specific commands may be required). Then restart the modem.

This AT command works on most Huawei/ZTE/LTE modules. If your device uses a OEM UI, put web.gprs.mtnnigeria.net in the APN field there

Example .mobileconfig for iOS (sample)

Warning: Some iOS versions/carriers restrict APN via profiles. This is a sample payload you can adapt with Apple Configurator:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" 
  "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
  <dict>
    <key>PayloadContent</key>
    <array>
      <dict>
        <key>PayloadType</key>
        <string>com.apple.telephony</string>
        <key>PayloadVersion</key>
        <integer>1</integer>
        <key>PayloadIdentifier</key>
        <string>com.example.mtn.apn</string>
        <key>APN</key>
        <string>web.gprs.mtnnigeria.net</string>
        <key>Username</key>
        <string></string>
        <key>Password</key>
        <string></string>
        <!-- Some keys are vendor-specific -->
      </dict>
    </array>
    <key>PayloadType</key>
    <string>Configuration</string>
    <key>PayloadVersion</key>
    <integer>1</integer>
    <key>PayloadIdentifier</key>
    <string>com.example.mtn.package</string>
  </dict>
</plist>

If the profile fails, use MTN automatic SMS or contact MTN support.

Example router/web UI JSON (generic)

Some advanced routers accept a JSON or API payload to set APN. Example structure (adapt to your router):

{
  "mobile": {
    "apn": "web.gprs.mtnnigeria.net",
    "username": "",
    "password": "",
    "authentication": "none",
    "pdptype": "IP"
  }
}

Apply via your router’s admin UI (often under Mobile WAN / Cellular / Dial-up).

More device examples

Windows 10/11 USB modem / eSIM

• Insert SIM / modem → Settings → Network & internet → Cellular → Advanced options → Edit APN: put web.gprs.mtnnigeria.net.
• For eSIM or cellular data plans, use the operator profile or manual edit.

MiFi (portable hotspot)

• Admin page (usually 192.168.8.1 or 192.168.0.1) → Settings → Network → Mobile Network → APN. Enter the APN and save. Reboot MiFi.

LTE Routers (home gateways)

• Usually under Mobile WAN → APN settings. Enter web.gprs.mtnnigeria.net and ensure network mode includes LTE/5G.

MMS / Multimedia

MTN’s main focus for general data is the APN above. MMS settings vary by device and are often preconfigured with the automatic SMS. If you need MMS specifically (rare for modern users), community sources report values like:

• MMSC: http://mms.mtn.co.za/mms/ (varies by region)
• MMS proxy/port: varies (may be blank)

Because MMS settings are less commonly needed and sometimes regional, request automatic settings from MTN (SETTINGS → 3888) and save the MMS profile they send. If MMS is mission-critical, contact MTN support to confirm the exact MMS server for your area.

Common problems & step-by-step troubleshooting

Below are the most common reasons MTN data won’t work and how to fix them.

Problem checklist (run through this, one by one)

1. No data after changing APN?
   • Make sure the APN you activated is selected as the active APN. Save and restart phone.
2. SIM not provisioned for data (new SIM)?
   • MTN sometimes needs a few minutes for provisioning. Restart, or dial 300 for MTN support.
3. Data is enabled?
   • Toggle Mobile Data off/on. Ensure airplane mode is off.
4. Network mode set to 2G only?
   • Set Preferred network to LTE/4G/5G in network settings.
5. Data bundle or balance?
   • Check your data balance (various USSD codes exist; see FAQ).
6. Tethering blocked?
   • Some bundles block hotspot/tethering. Use “XtraShare” or a proper bundle that allows tethering, or contact MTN support.
7. Phone/vendor quirks
   • Some phones require Proxy/Port to be blank. Remove any proxy values if speed is poor. Many guides recommend leaving proxy/port blank for full internet.
8. Accept MTN config SMS
   • If you requested automatic settings and received a message, accept or install it. Some phones require manual installation (tap message → Install).

Advanced troubleshooting

• Try a different APN profile: create another APN but leave proxy & port blank. Some users report better speeds with the proxy removed.
• Test in airplane mode (off) with only MTN SIM: to rule out dual-SIM conflict.
• Test in another phone: to confirm SIM/service issue vs device issue.
• Check coverage map: if there’s no data coverage in your area, MTN’s 4G/5G may not be present. Use MTN service channels to confirm.

Troubleshooting table (quick fixed)

Symptom	Likely cause	Quick fix
No mobile data	Wrong APN / APN not selected	Create APN web.gprs.mtnnigeria.net, save & restart
Data connects but slow	Proxy/old APN / poor signal	Remove proxy & port, switch to LTE/5G, try different APN
MMS not sending	Wrong MMS server	Accept MTN settings SMS or contact support
Hotspot not working	Bundle restriction	Check bundle terms or buy tethering-enabled bundle
Modem won’t connect	Wrong PDP context	Use AT+CGDCONT=1,"IP","web.gprs.mtnnigeria.net"

Frequently asked questions about How to get MTN settings automatically

Q1: What is the MTN APN for Nigeria?

A: web.gprs.mtnnigeria.net with account name MTN WEB. Use the automatic SETTINGS to 3888 if unsure.

Q2: I entered the APN but still have no internet what now?

A: Try toggling mobile data, selecting the new APN as active, and restarting. If still no internet, request automatic settings (SETTINGS → 3888). If no improvement, test the SIM in another phone or call MTN support (300).

Q3: Should I use a proxy or port values?

A: For modern broadband use, leave proxy and port blank. Proxy values were used for old WAP configurations and can slow modern browsing. Many users report improved speeds with proxy/port cleared.

Q4: Can I tether/hotspot with MTN?

A: Some bundles restrict tethering. Choose a bundle that explicitly allows hotspot or contact MTN to enable tethering on your line. The MyMTN app and bundle descriptions state whether tethering is permitted.

Q5: What about internet.mtn or other APNs I see online?

A: APN names can vary by country or device. For MTN Nigeria, the official documented APN is web.gprs.mtnnigeria.net. If other APNs are suggested (e.g., internet.mtn) they may apply to other MTN operations or be community-tested alternatives use official MTN first.

Q6: How do I check my data balance on MTN?

A: Commonly used USSD: 1314# or use the MyMTN app. Some bundles use unique codes, check with 300 or the MyMTN app for exact details.

Q7: I have a 4G/5G capable phone but only 3G shows what do I do?

A: Settings → Network & Internet → Mobile Network → Preferred network type → choose LTE or 5G. Also ensure you have a SIM that supports 4G/5G (some old SIMs may be 2G/3G only)

Final notes How to get MTN settings automatically

Most MTN data issues are solved with the SETTINGS SMS or by creating the APN web.gprs.mtnnigeria.net. If you follow the steps above, you will likely be online in no time. If not, drop the device model + error (e.g., “no connection”, “can’t tether”) and I’ll give step-by-step troubleshooting

Also Check

MTN Data Plans & Subscription Codes (Updated 2025)

MTN Night Browsing Plans & Codes

MTN Tariff Plans & Migration Codes

How to Borrow Airtime/Data on MTN

Code to Hide Number on MTN